Product Description
The whole machine has its own booster system plug hole section, which is suitable for high viscosity ink/resin plug hole. It adopts well-known electrical hardware configuration at home and abroad, is equipped with advanced design concepts and stable mechanical structure ratio, and is supported by a number of patented technologies. Ensure stable and reliable production and operation of products.
Hardware Configuration
PLC: MITSUBISHI
Rail: THK
Cylinder: AirTAC
Communication: MITSUBISHI
Touch screen: weinview
Synchronous belt: MEGADYNE
Bearing: NSK
Ball screw: TBI
Technical Parameter
Maximum processing size: 630 mm×730mm
Squeegee pressure uniformity: ≤5kgf
Minimum processing size: 350mm×400mm
Printing pitch: 0~10 mm
Board thickness range: 0.8-4.0mm
Clearance from the board: 0~10mm
Printing speed: 30~300 mm/sec adjustable
Fine adjustment of screen frame: X, Y, θ±5mm
Maximum screen frame size: 1200×1100mm
Fixed screen frame: fixed at six points
Minimum screen frame size: 800×800mm
Covering/scraping angle: ±15°
The smallest plug hole diameter: ≤ 0.20mm
Scratch stroke: servo 0~900 mm adjustable
Table top level accuracy: ±0.1mm/m2
Equipment power: 3 KWH
Plug hole accuracy: ±0.02mm
Equipment size: 1500×1700×1900 mm
Product Performance
Supporting pressurization system to maintain pressure balance, the kilogram air pressure can reach 8-12KG
The self-locking function is set mechanically to ensure the stability and balance of the plug hole
High-viscosity ink/resin can be filled in one stroke
Four-column power lifting system, high mechanical strength, good rigidity, and strong stability